Bay Networks 5391 Guía de instalación Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
2-5Remote Annex 6300 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 6300
Attaching the Mounting Bracket to the Remote Annex 6300
Attach the rear mounting bracket to the Remote Annex 6300 as
follows:
1 Remove the mounting brackets and hardware kit from its package.
2 Remove two screws from the rear of the cover on each side of the
Remote Annex 6300, as shown in
Figure 2-3. Save these screws; you
will need them later to install the rear mounting bracket.
3 Install rear mounting brackets to the device using the four screws
previously removed and the additional hardware supplied in the
hardware kit.
4 Tighten the screws to secure the bracket to the device.
Figure 2-3. Attaching the Mounting Bracket to the Remote Annex 6300
Bracket Mounting
(2 Screws each side)
Bracket Assembly
(2 Screws, 2 Nuts, and 
4 Washers each side)
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 137 138

Comentarios a estos manuales

Sin comentarios