
9031561 E1 Device Views
2-7
What Is in This Chapter
Interface Icon Subviews Menu Selections
Interface Threshold View
The Interface Threshold View provides the following information:
Load Threshold
The ON and OFF values are set to determine the point at which a load alarm
will be turned on or off.
Packet Rate Threshold
The ON and OFF values are set to determine the point at which a packet
transmission alarm will be turned on or off.
Error Rate Threshold
The ON and OFF values are set to determine the point at which an error
alarm will be turned on or off.
% Discarded Threshold
The ON and OFF values are set to determine the point at which a discarded
threshold alarm will be turned on or off.
Next Boot Net Mask
Displays the subnet mask for the interface that will be used for the next boot.
If no subnet mask is used, then the value is 0.0.0.0. The current subnet mask
for the interface is found in the IP Address Table.
Load Server Addr
Displays the IP address of the load server for the configuration file and/or the
image file. If the IP address is not used, then the value is 0.0.0.0.
Valid Flag
Indicates whether the configuration and image file(s) or either were
downloaded from this interface and whether the file names are unchanged.
Table 2-3 lists these values and their descriptions.
Config File Name
Displays the name of the configuration file currently associated with the
interface. When not used, the value is a zero length string.
Image File Name
Displays the name of the image file(s) currently associated with the interface.
Some agents in special situations may support a value which contains
multiple file names instead of a single file name. Multiple names are specified
Table 2-3. Valid Flag Status Values
Value Description
valid Configuration and/or image file(s) downloaded from this
interface are currently in use.
invalid Configuration and/or image files downloaded from this
interface are not in use (this may also mean that there are
no files downloaded from this interface).
Comentarios a estos manuales