Bay Networks 5391 Guía de instalación descargar pdf (Pagina 42)

Remote Annex 2000 Hardware Installation Guide

Chapter 2 Installing the Remote Annex 2000

2-8

3 Turn on the Console Terminal and set the terminal to 9600 baud,

eight data bits, no parity, one stop bit, and XON/XOFF ﬂow control.

The ROM Monitor assumes that this terminal is CRT-based and

displays the backspace (BS) character accordingly. See Chapter 3

for information on invoking the ROM monitor.

Connecting Serial Devices

The Remote Annex 2000 provides 4, 8, or 16 asynchronous RJ45 serial

ports, depending on the device configuration. To attach the serial port

cables:

1 Insert the RJ45 end of the cable into one of the serial ports located

on the Remote Annex 2000’s rear panel (see

Figure 2-7).

2 Connect the opposite end of the serial port cable to your serial

device.

Figure 2-7. Connecting the Serial Port Cable to the Remote Annex 2000

WARNING

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 135 136

Sin comentarios

Bay Networks 5391 Guía de instalación Pagina 42