Bay Networks Remote Annex Guía de instalación descargar pdf (Pagina 54)

Nortel Networks 5399 Access Switch Hardware Installation Guide

Chapter 2 Installing the Model 5399 Remote Access Concentrator Module

2-22

17. To verify and record the unit’s Ethernet address, type addr

-d and press at the monitor prompt:

The screen display looks similar to this:

18. Verify that the Remote Access Concentrator is on-line by

entering the net command. The following prompt appears:

EnterSegmenttobeused[1]:

A “pass” or “fail” message is displayed. If fail is displayed, try

verifying the network from another device.

Once the Remote Access Concentrator is on-line, you can download the

image software to the server (see “

Installing the Operational Software

and Loading the Image”onpage2-32).

Return

monitor:: addr -d

Ethernet address (hex): 00-80-2d-XX-XX-XX

Internet address: <uninitialized>

Subnet mask: 255.255.0.0

Broadcast address: 0.0.0.0

Preferred Load Host address: <any host>

Preferred Dump Host address: 0.0.0.0

Load/Dump Gateway address: 0.0.0.0

Type of IP packet encapsulation: <ethernet>

Load Broadcast: Y

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 125 126

Sin comentarios

Bay Networks Remote Annex Guía de instalación Pagina 54